• 29cm x 20cm Ireland’s Largest & Best Horse & Pony Meeting. Every year in August, the field at Ballintaggart changes into an enormous racetrack filled with horses, jockeys and horse racing enthusiasts from all over Ireland and the rest of the world. No less than 20 races are held with a total prize fund of €40,000! The centre of the racecourse is filled with bouncing castles, fortune-tellers and fair stands that sell everything from bouncing balls to saddler's sponges. Entertainment for the whole family!  
  • 50cm x 48cm
    ORD NA MÓNA produces some 315,000 tons of briquettes per annum from 800,000 tons of milled peat. Production takes place at three factories situated at Derrinlough (between Birr and Cloghan), Co. Offaly, Croghan (between Edenderry and Daingean), Co. Offaly, and at Lullymore, Co. Kildare. Lullymore was erected in 1935 and modified extensively in 1957-58, and production is 45,000 tons/annum. Derrinlough followed in 1959 and Croghan in 1961, each producing 135,000 tons/ annum. There are several descriptions available of earlier attempts at briquetting dried milled peat in Ireland, and of these the most interesting is that by Hodgson (Transactions of I.C.E.1. 1862, and Proceedings of the Inst. of Mech. Engineers 1865) at Derrylea, Co. Offaly. Considerable detail is given in these articles of, not alone Hodgson’s method of winning milled peat on Derrylea bog, but of the erection and operation of the associated briquette factory. Much of the technical data on the process at the time is topical still. Of particular interest is the means by which he dried the peat to 10% m.c. in a 500 foot long scraper dryer, and his development of the string type briquette press claimed to be the progenitor of all subsequent presses as used for brown coal and peat briquetting throughout the world. Bord na Móna briquettes go to customers in the form of bales (28-lb. bundles), loose or in brickeen form, i.e. single loose briquettes cut into 3 equal parts. These latter are used extensively for industrial boiler applications. The processing of the milled peat from its arrival in the factory as far as the briquetting and storage stages is shown in the accompanying flow diagram. The data and descriptions which follow refer to the new factories unless otherwise designated. Following the tippling, blending, fine milling and screening process, it will be seen that the peat tailings are used as fuel in a boiler producing steam at a pressure of 37 atmospheres for a back pressure turbo-alternator of 2,400 kW. maximum output. All power used in the factory is supplied from this source, whilst the low pressure steam at 3 atmospheres passes to the peat dryers. About 9 tons per hour of tailings are used in the boiler, whilst 36 tons per hour of fine peat are conveyed from the screens to the Peco drying process. This system of drying was developed in Scotland during the First World War and the first plant using the system was built near Dumfries. The Peco system is essentially the indirect drying of milled peat by means of hot water and steam while the peat is being pneumatically conveyed in an air/vapour stream. The peat in finely divided form (all through a 10 mm. screen) dries rapidly from its intake moisture-circa 50% m.c.-to 10% m.c. At this moisture content briquettes can be formed under a pressure of some 750 atmospheres in a specially designed press which extrudes the briquettes continuously into cooling runners some 70 metres long. This process is necessary so as to cool and thereby harden the briquettes prior to baling and storage, and to provide steady back pressure on briquettes issuing from the press mouth. The output of briquettes in the new factories averages 18 tons an hour from an input of 45 tons, or 2.5 to 1 input/output ratio.

    Special Equipment

    Milled peat as delivered to the briquette factory possesses rather variable physical characteristics in regard to moisture content, bulk density, fibre content, ash content, etc., and there is need to process this variable feed material to make it suitable for manufacturing a finished product of minimum variation from fixed standards. To this end a number of special pieces of equipment have been developed and built into each factory:
    • Blending Bunker
    • Buffer Bunker
    • Dryers
    • Spiral tubes (dryers)
    • Press Prepackers
    • Anti-corrosive devices
     

    Blending Bunker

    Each day’s factory requirements of milled peat ­ about 1,000 tons – is tippled and conveyed by belt over a 150 metre long x 10 metres wide x 12 metres high concrete box building. The belt runs overhead on the centre line of this building and distributes the milled peat in layer upon layer to a total depth of about 8 metres. Some 200 wagons per day from 3 or more bog piles are blended in this way and a mean value for each of the peat physical characteristics is obtained. The bog piles of peat have widely different characteristics and blending achieves the following results. Moisture content -This varies on receipt from 40% to 60%. As far as possible blending is arranged to yield a moisture content of around 50% in the factory supply. Ash content – In blending peat from bogs of low ash content the target is 1.5% plus/minus 1%, and from higher ash bogs the target is 3% plus/ minus 1% in practice. Bulk density – As measured at the presses ­ where the peat is both fine and free flowing – the target density is 210 grms/litre from bogs of low general density, and 240 grms/litre from higher density areas. A given blend will vary some 10 grms/litre above and below this target figure during the duration of the blend-1 day. If peat were fed to the factory directly as it came from the bog, then 2-hourly (train load) variations in density from 140 grms/litre up to 350 grms/litre could be expected, making control of the process virtually impossible. Fibre -Some areas of bog provide milled peat of very high fibre content and this is controlled during the blending operation by dilution to a figure acceptable to the factory process. Some conveyors in the factory have an upper tolerance level for fibre and these conveyors are used as controls. High fibre content restricts peat flow in ducts and chutes and can inhibit output as a result.

    Buffer Bunker

    Interposed between the blending bunker and the 125 KW. hammer mill is a buffer bunker which is designed to act as the factory feed control. Its floor consists of an infinitely variable speed chain grate to feed milled peat to the factory screens via the hammer mill. This finely regulated feed is necessary in order to present the mill with a steady load and so ensure even and regular comminution. The bunker itself has vertical walls in order to keep the milled peat flowing downwards evenly – particularly when it is in the higher moisture ranges. In the case of narrower bunkers and chutes within the factory the walls have been given negative slopes to aid flow, and are insulated where desirable. The fully automatic peat removal device in the main blending bunker bites into the milled peat pile in a regular forward motion, but for a variety of reasons the flow of peat to the underground belt conveyor can vary plus/minus 20% or more on the control figure. The buffer bunker is essential in the levelling out of this fluctuation in peat coming from the blending bunker. The forward speed of the blending bunker peat removal device is controlled automatically by upper and lower level indicators in the buffer bunker.

    Dryers

    The Peco type dryer consists essentially of an upper and lower tube plate set in a shell capable of holding either hot water (as in the first 2 of the 5 dryers in the factory dryer system) or steam (as in the last 3 dryers). Tubes are fitted between the tube plates, and fine peat is blown up through these tubes and dried due to heat transfer from the heating medium surrounding the tubes. Owing to the fact that the largest peat briquette factories built up to 1958 were for 50,000 tons briquette output, it was necessary to redesign the dryers to suit outputs of 135,000 tons/annum. Dryers for the lower output were some 2 metres diameter by 10 to 12 metres high and with tubes from 38 mm. i.d. to 55 mm. i.d. Throughputs of 8-10 tons per hour were possible but some tube chokage was a recurring factor in operation. Redesign involved lengthening the dryer to 18 metres high, increasing the diameter to 3 metres, and increasing the tube size to 70 mm. i.d. with consequential increases in all loadings and in the problems associated with the peat feed flow and distribution to the bottom tube plates. After some initial commissioning difficulties in providing the necessary air and air/vapour quantities the dryers performed satisfactorily at throughputs ranging from 18 to 24 tons per hour, depending on input moisture content, density and flow characteristics, of the peat feed.

    Dryer Tubes

    In order to obtain the highest possible specific evaporation rates from the heated tube area in 5 dryers of the system, it was essential to fit specially designed tubes with a 3-start indented spiral helix­ a form of rifling. By such means the ascending peat particles are pressed by centrifugal force against the hot walls of the tube and this effectively breaks the adhering air skin flowing at 15 m/sec. parallel with the tube inner surface. As a result heat flows more efficiently from the tube walls to the moisture in the peat.

    Press Prepackers

    Following initial experiments without any form of prepacking of the dry peat fines just prior to their entry to the ram of the press, it was found essential to fit such a device. Without a pre-packer the maximum thickness of briquette obtainable from a press was 18-21 mm. A simple push type ram prepacker was added above and behind the main press ram in such a way that the peat fines descending into the press chamber were held in a packed condition (approximately 2 to 1 by volume) awaiting the next stroke of the main ram. With this device briquette thickness is controllable up to 40 mm. (or more in the case of higher density peat).

    Anti-corrosion

    As would be anticipated when dealing with a product which has a pH value of 3.5 in its moistened condition, many problems of corrosion have had to be solved in the briquette factories. Associated with corrosive attack is that of erosion from mineral matter in the peat, and care had to be taken in deciding which form of attack was the pre­dominant one prior to prescribing a solution, as combatant materials are costly. Amongst the items of plant modified were the press formes or moulds within which the briquettes are formed. Originally made from carbon steel with a life between grindings of about 3 weeks, the use of a stainless die tool steel increased forme life to some 12-26 weeks, depending on the mineral matter content of the peat being briquetted. Apart from the elongation of time between grindings the main gain was the ability to hold a high standard of briquette finish and strength over a much longer period. Many mild steel ducts and cyclones are in use where condensation of vapour caused corrosion the products of which were soft enough to be cleaned off by low level erosion. This erosion exposed the surface to renewed corrosion and the vessels had to be clad internally, or be replaced entirely in stainless steel of suitable quality. An interesting example of this occurred on outdoor cyclones where the supports passed through the heat insulation and were welded to the vessel. A small area of the 6 mm. thick shell of the cyclone where each support was attached was colder than the vapour temperature within the cyclone. Rapid corrosion-erosion of this area showed itself by distortion of the sheeting, and settling of the cyclone. Covering of each small area with 2 mm. stainless steel eliminated further trouble. Other equipment which required protection against aggressive attack by peat vapour comprised the heat exchanger units and associated vessels and ducting, fan impellors, screw conveyor spirals and troughs etc. Erosion of the peat inlet ends of the tubes of the dryers was stopped by the insertion of 100 mm. lengths of Yorcoron CuNiFeMn alloy tubing.

    Boiler Plant

    The boilers in all three factories are pulverised peat fired type with steam outlet conditions of 37 atmospheres pressure and 425°C. temperature. Derrinlough and Croghan boilers are of 20 tons/hr. and Lullymore is 10 tons/hr. output. Each is operated for 7,200 hours per annum and is shut for maintenance every 2,000 hours. Steady and continuous running help to reduce wear and tear and the blended peat supply helps greatly to this end.

    Turbine Alternator

    A 2,400 kW. 3000 r.p.m. Stal radial flow back pressure set is installed at both Derrinlough and Croghan factories. Inlet steam pressure is 35 atmospheres and back pressure is 0.2-3 atmospheres. Generation is at 220/380 volts, 50 cycles. The turbo alternator at Lullymore is a Metropolitan Vickers 1,000 kW. B.P. set with similar inlet and outlet conditions to the other sets. Condensers are used to return unwanted steam to the hot well.

    Pressing, Baling and Storage

    The briquette presses are 7″ twin type supplied by Buckau Wolf and without the tongue adjustment which is a usual fixture on brown coal presses. Each press flywheel is of 7 tons weight and the short centred drive is by flat extramultus type belt. There are 5 such presses in each of the larger factories. The crankshaft is 180 degree two throw and press speed is variable in the range 40-80 r.p.m. normal operation being about 70 r.p.m. The motor is commutator type 3 phase, size 160/80 kW. 540/270 r.p.m. and designed to give P.F. improvement on the system. Press operation is continuous for periods up to 3 weeks or longer, between stops for forme, ram, or other routine maintenance.

    Baling

    Customer preference has increased steadily over the years for briquettes in bales of 28 lbs. weight (12.6 kg.) and these are made up at the end of the cooling runners – a distance of 70 metres from the press, and are strapped on automatic wire baling machines. Storage of bales takes place on flat pallets. Each pallet takes up to 2½ tons and is fork lifted into covered storage to a height of up to 7 metres. Prior to the onset of winter sales this storage of bales can run to 15,000 to 20,000 tons at the larger factories, with perhaps 5,000-10,000 tons of loose briquettes and brickeen stocks. Out loading of these latter from the storage bunkers into lorries is effected by remote control of the special pusher type outloader and the associated underground conveyor belt system. The operator is positioned above the lorry being loaded and can call up the precise amount of briquettes required by the lorryman.

    General

    Almost all equipment in each of the larger factories is controlled, started or stopped from a central control desk and the necessary safety devices have been incorporated to protect personnel when remote starting is in progress. The factory operators number six per shift and a 4 shift system is used. Supporting maintenance, loading and supervisory personnel bring the total factory staff to 120 people.
  • 62cm x 45cm An absolute once off piece of Irish Memorabilia .We at the Irish Pub Emporium were so lucky to acquire from a private collector .These superb castiron road signs were commissioned by the Irish Free State in the late 1940s post and were initially the responsibility of the newly formed Irish Tourism Organisation -Fógra Failte (later to become Bord Failte and then Failte Ireland). "The former 'fingerpost' style of Irish directional signs can still be seen in many rural areas of the Republic of Ireland. These signs differ from their modern-day equivalent as they have black raised text on a white background. Destinations are in all caps (the placename in Irish was on top and in a smaller font than the one in English). Sometimes, the former route number ("T" for trunk road, "L" for link road) can be seen, and the former Bord Fáilte logo can be seen on some (they had responsibility for signs for a time), as well as occasionally a harp. Distances on these signs are in miles. This style of sign has become a common feature of many tourist images of Ireland and can be seen in some Irish pubs. However, they can be easily rotated, and have been done so on occasion and therefore are not completely reliable. While most examples of these signs still in situ are rural finger-posts, the advance directional sign of this era can still very occasionally be seen: this has a grey background, with the destinations in outlined, white-background boxes linked together with black lines, and the text is not raised on these, unlike on fingerposts. These signs, rare even when the system was in use, can be seen in some areas of Dún Laoghaire and Drogheda. These signs were prescribed under various regulations, with the final design prescribed under the Road Traffic Signs (Regulations) 1962. Despite the new sign style being introduced in 1977, the design change was never legislated for (apart from a reference to the change to italics in 1989) and the old designs were repealed only under the 1997 regulations, 20 years later.
  • 61cm x 69cm An absolute once off piece of Irish Memorabilia .We at the Irish Pub Emporium were so lucky to acquire from a private collector who has moved overseas.These superb castiron road signs were commissioned by the Irish Free State in the late 1940s post and were initially the responsibility of the newly formed Irish Tourism Organisation -Fógra Failte (later to become Bord Failte and then Failte Ireland). "The former 'fingerpost' style of Irish directional signs can still be seen in many rural areas of the Republic of Ireland. These signs differ from their modern-day equivalent as they have black raised text on a white background. Destinations are in all caps (the placename in Irish was on top and in a smaller font than the one in English). Sometimes, the former route number ("T" for trunk road, "L" for link road) can be seen, and the former Bord Fáilte logo can be seen on some (they had responsibility for signs for a time), as well as occasionally a harp. Distances on these signs are in miles. This style of sign has become a common feature of many tourist images of Ireland and can be seen in some Irish pubs. However, they can be easily rotated, and have been done so on occasion and therefore are not completely reliable. While most examples of these signs still in situ are rural finger-posts, the advance directional sign of this era can still very occasionally be seen: this has a grey background, with the destinations in outlined, white-background boxes linked together with black lines, and the text is not raised on these, unlike on fingerposts. These signs, rare even when the system was in use, can be seen in some areas of Dún Laoghaire and Drogheda. These signs were prescribed under various regulations, with the final design prescribed under the Road Traffic Signs (Regulations) 1962. Despite the new sign style being introduced in 1977, the design change was never legislated for (apart from a reference to the change to italics in 1989) and the old designs were repealed only under the 1997 regulations, 20 years later.
  • 55cm x 68cm An absolute once off piece of Irish Memorabilia .We at the Irish Pub Emporium were so lucky to acquire from a private collector who has moved overseas.These superb castiron road signs were commissioned by the Irish Free State in the late 1940s post and were initially the responsibility of the newly formed Irish Tourism Organisation -Fógra Failte (later to become Bord Failte and then Failte Ireland). "The former 'fingerpost' style of Irish directional signs can still be seen in many rural areas of the Republic of Ireland. These signs differ from their modern-day equivalent as they have black raised text on a white background. Destinations are in all caps (the placename in Irish was on top and in a smaller font than the one in English). Sometimes, the former route number ("T" for trunk road, "L" for link road) can be seen, and the former Bord Fáilte logo can be seen on some (they had responsibility for signs for a time), as well as occasionally a harp. Distances on these signs are in miles. This style of sign has become a common feature of many tourist images of Ireland and can be seen in some Irish pubs. However, they can be easily rotated, and have been done so on occasion and therefore are not completely reliable. While most examples of these signs still in situ are rural finger-posts, the advance directional sign of this era can still very occasionally be seen: this has a grey background, with the destinations in outlined, white-background boxes linked together with black lines, and the text is not raised on these, unlike on fingerposts. These signs, rare even when the system was in use, can be seen in some areas of Dún Laoghaire and Drogheda. These signs were prescribed under various regulations, with the final design prescribed under the Road Traffic Signs (Regulations) 1962. Despite the new sign style being introduced in 1977, the design change was never legislated for (apart from a reference to the change to italics in 1989) and the old designs were repealed only under the 1997 regulations, 20 years later.
  • 45cm x 66cm An absolute once off piece of Irish Memorabilia .We at the Irish Pub Emporium were so lucky to acquire from a private collector who has moved overseas.These superb castiron road signs were commissioned by the Irish Free State in the late 1940s post and were initially the responsibility of the newly formed Irish Tourism Organisation -Fógra Failte (later to become Bord Failte and then Failte Ireland). "The former 'fingerpost' style of Irish directional signs can still be seen in many rural areas of the Republic of Ireland. These signs differ from their modern-day equivalent as they have black raised text on a white background. Destinations are in all caps (the placename in Irish was on top and in a smaller font than the one in English). Sometimes, the former route number ("T" for trunk road, "L" for link road) can be seen, and the former Bord Fáilte logo can be seen on some (they had responsibility for signs for a time), as well as occasionally a harp. Distances on these signs are in miles. This style of sign has become a common feature of many tourist images of Ireland and can be seen in some Irish pubs. However, they can be easily rotated, and have been done so on occasion and therefore are not completely reliable. While most examples of these signs still in situ are rural finger-posts, the advance directional sign of this era can still very occasionally be seen: this has a grey background, with the destinations in outlined, white-background boxes linked together with black lines, and the text is not raised on these, unlike on fingerposts. These signs, rare even when the system was in use, can be seen in some areas of Dún Laoghaire and Drogheda. These signs were prescribed under various regulations, with the final design prescribed under the Road Traffic Signs (Regulations) 1962. Despite the new sign style being introduced in 1977, the design change was never legislated for (apart from a reference to the change to italics in 1989) and the old designs were repealed only under the 1997 regulations, 20 years later.
  • 61cm x 69cm An absolute once off piece of Irish Memorabilia .We at the Irish Pub Emporium were so lucky to acquire from a private collector who has moved overseas.These superb castiron road signs were commissioned by the Irish Free State in the late 1940s post and were initially the responsibility of the newly formed Irish Tourism Organisation -Fógra Failte (later to become Bord Failte and then Failte Ireland). "The former 'fingerpost' style of Irish directional signs can still be seen in many rural areas of the Republic of Ireland. These signs differ from their modern-day equivalent as they have black raised text on a white background. Destinations are in all caps (the placename in Irish was on top and in a smaller font than the one in English). Sometimes, the former route number ("T" for trunk road, "L" for link road) can be seen, and the former Bord Fáilte logo can be seen on some (they had responsibility for signs for a time), as well as occasionally a harp. Distances on these signs are in miles. This style of sign has become a common feature of many tourist images of Ireland and can be seen in some Irish pubs. However, they can be easily rotated, and have been done so on occasion and therefore are not completely reliable. While most examples of these signs still in situ are rural finger-posts, the advance directional sign of this era can still very occasionally be seen: this has a grey background, with the destinations in outlined, white-background boxes linked together with black lines, and the text is not raised on these, unlike on fingerposts. These signs, rare even when the system was in use, can be seen in some areas of Dún Laoghaire and Drogheda. These signs were prescribed under various regulations, with the final design prescribed under the Road Traffic Signs (Regulations) 1962. Despite the new sign style being introduced in 1977, the design change was never legislated for (apart from a reference to the change to italics in 1989) and the old designs were repealed only under the 1997 regulations, 20 years later.
  • 62cm x 62cm approx A real rarity here in the octagonal shape of a vintage Ireland Inland Waterways Cast-iron Sign denoting the river Shannon & Limerick.This most unusual find has been carefully restored and repainted and will make a most suitable exhibit for the most discerning Irish bar with Limerick /River Shannon affiliations.Please contact us directly at irishpubemporium@gmail.com or at 00353 878393200 to discuss.
  • Out of stock
    32cm x 48cm  Dublin Arthur Guinness started brewing ales in 1759 at the St James Gate Brewery,Dublin.On 31st December 1759 he signed a 9,000 year lease at £45 per annum for the unused brewery.Ten years later, on 19 May 1769, Guinness first exported his ale: he shipped six-and-a-half barrels to Great Britain before he started selling the dark beer porter in 1778. The first Guinness beers to use the term were Single Stout and Double Stout in the 1840s.Throughout the bulk of its history, Guinness produced only three variations of a single beer type: porter or single stout, double or extra and foreign stout for export. “Stout” originally referred to a beer’s strength, but eventually shifted meaning toward body and colour.Porter was also referred to as “plain”, as mentioned in the famous refrain of Flann O’Brien‘s poem “The Workman’s Friend”: “A pint of plain is your only man.” Already one of the top-three British and Irish brewers, Guinness’s sales soared from 350,000 barrels in 1868 to 779,000 barrels in 1876.In October 1886 Guinness became a public company, and was averaging sales of 1,138,000 barrels a year. This was despite the brewery’s refusal to either advertise or offer its beer at a discount. Even though Guinness owned no public houses, the company was valued at £6 million and shares were twenty times oversubscribed, with share prices rising to a 60 per cent premium on the first day of trading. The breweries pioneered several quality control efforts. The brewery hired the statistician William Sealy Gosset in 1899, who achieved lasting fame under the pseudonym “Student” for techniques developed for Guinness, particularly Student’s t-distribution and the even more commonly known Student’s t-test. By 1900 the brewery was operating unparalleled welfare schemes for its 5,000 employees. By 1907 the welfare schemes were costing the brewery £40,000 a year, which was one-fifth of the total wages bill. The improvements were suggested and supervised by Sir John Lumsden. By 1914, Guinness was producing 2,652,000 barrels of beer a year, which was more than double that of its nearest competitor Bass, and was supplying more than 10 per cent of the total UK beer market. In the 1930s, Guinness became the seventh largest company in the world. Before 1939, if a Guinness brewer wished to marry a Catholic, his resignation was requested. According to Thomas Molloy, writing in the Irish Independent, “It had no qualms about selling drink to Catholics but it did everything it could to avoid employing them until the 1960s.” Guinness thought they brewed their last porter in 1973. In the 1970s, following declining sales, the decision was taken to make Guinness Extra Stout more “drinkable”. The gravity was subsequently reduced, and the brand was relaunched in 1981. Pale malt was used for the first time, and isomerized hop extract began to be used. In 2014, two new porters were introduced: West Indies Porter and Dublin Porter. Guinness acquired the Distillers Company in 1986.This led to a scandal and criminal trialconcerning the artificial inflation of the Guinness share price during the takeover bid engineered by the chairman, Ernest Saunders. A subsequent £5.2 million success fee paid to an American lawyer and Guinness director, Tom Ward, was the subject of the case Guinness plc v Saunders, in which the House of Lords declared that the payment had been invalid. In the 1980s, as the IRA’s bombing campaign spread to London and the rest of Britain, Guinness considered scrapping the Harp as its logo. The company merged with Grand Metropolitan in 1997 to form Diageo. Due to controversy over the merger, the company was maintained as a separate entity within Diageo and has retained the rights to the product and all associated trademarks of Guinness.
    The Guinness Brewery Park Royal during demolition, at its peak the largest and most productive brewery in the world.
    The Guinness brewery in Park Royal, London closed in 2005. The production of all Guinness sold in the UK and Ireland was moved to St. James’s Gate Brewery, Dublin. Guinness has also been referred to as “that black stuff”. Guinness had a fleet of ships, barges and yachts. The Irish Sunday Independent newspaper reported on 17 June 2007 that Diageo intended to close the historic St James’s Gate plant in Dublin and move to a greenfield site on the outskirts of the city.This news caused some controversy when it was announced.The following day, the Irish Daily Mail ran a follow-up story with a double page spread complete with images and a history of the plant since 1759. Initially, Diageo said that talk of a move was pure speculation but in the face of mounting speculation in the wake of the Sunday Independent article, the company confirmed that it is undertaking a “significant review of its operations”. This review was largely due to the efforts of the company’s ongoing drive to reduce the environmental impact of brewing at the St James’s Gate plant. On 23 November 2007, an article appeared in the Evening Herald, a Dublin newspaper, stating that the Dublin City Council, in the best interests of the city of Dublin, had put forward a motion to prevent planning permission ever being granted for development of the site, thus making it very difficult for Diageo to sell off the site for residential development. On 9 May 2008, Diageo announced that the St James’s Gate brewery will remain open and undergo renovations, but that breweries in Kilkenny and Dundalk will be closed by 2013 when a new larger brewery is opened near Dublin. The result will be a loss of roughly 250 jobs across the entire Diageo/Guinness workforce in Ireland.Two days later, the Sunday Independent again reported that Diageo chiefs had met with Tánaiste Mary Coughlan, the deputy leader of the Government of Ireland, about moving operations to Ireland from the UK to benefit from its lower corporation tax rates. Several UK firms have made the move in order to pay Ireland’s 12.5 per cent rate rather than the UK’s 28 per cent rate. Diageo released a statement to the London stock exchange denying the report.Despite the merger that created Diageo plc in 1997, Guinness has retained its right to the Guinness brand and associated trademarks and thus continues to trade under the traditional Guinness name despite trading under the corporation name Diageo for a brief period in 1997. In November 2015 it was announced that Guinness are planning to make their beer suitable for consumption by vegetarians and vegans by the end of 2016 through the introduction of a new filtration process at their existing Guinness Brewery that avoids the need to use isinglass from fish bladders to filter out yeast particles.This went into effect in 2017, per the company’s FAQ webpage where they state: “Our new filtration process has removed the use of isinglass as a means of filtration and vegans can now enjoy a pint of Guinness. All Guinness Draught in keg format is brewed without using isinglass. Full distribution of bottle and can formats will be in place by the end of 2017, so until then, our advice to vegans is to consume the product from the keg format only for now. Guinness stout is made from water, barley, roast malt extract, hops, and brewer’s yeast. A portion of the barley is roasted to give Guinness its dark colour and characteristic taste. It is pasteurisedand filtered. Until the late 1950s Guinness was still racked into wooden casks. In the late 1950s and early 1960s, Guinness ceased brewing cask-conditioned beers and developed a keg brewing system with aluminium kegs replacing the wooden casks; these were nicknamed “iron lungs”.Until 2016 the production of Guinness, as with many beers, involved the use of isinglass made from fish. Isinglass was used as a fining agent for settling out suspended matter in the vat. The isinglass was retained in the floor of the vat but it was possible that minute quantities might be carried over into the beer. Diageo announced in February 2018 that the use of isinglass in draught Guinness was to be discontinued and an alternative clarification agent would be used instead. This has made draught Guinness acceptable to vegans and vegetarians. Arguably its biggest change to date, in 1959 Guinness began using nitrogen, which changed the fundamental texture and flavour of the Guinness of the past as nitrogen bubbles are much smaller than CO2, giving a “creamier” and “smoother” consistency over a sharper and traditional CO2 taste. This step was taken after Michael Ash – a mathematician turned brewer – discovered the mechanism to make this possible. Nitrogen is less soluble than carbon dioxide, which allows the beer to be put under high pressure without making it fizzy. High pressure of the dissolved gas is required to enable very small bubbles to be formed by forcing the draught beer through fine holes in a plate in the tap, which causes the characteristic “surge” (the widget in cans and bottles achieves the same effect). This “widget” is a small plastic ball containing the nitrogen. The perceived smoothness of draught Guinness is due to its low level of carbon dioxide and the creaminess of the head caused by the very fine bubbles that arise from the use of nitrogen and the dispensing method described above. “Foreign Extra Stout” contains more carbon dioxide, causing a more acidic taste. Contemporary Guinness Draught and Extra Stout are weaker than they were in the 19th century, when they had an original gravity of over 1.070. Foreign Extra Stout and Special Export Stout, with abv of 7.5% and 9% respectively, are perhaps closest to the original in character.Although Guinness may appear to be black, it is officially a very dark shade of ruby. The most recent change in alcohol content from the Import Stout to the Extra Stout was due to a change in distribution through North American market. Consumer complaints have influenced recent distribution and bottle changes.
    Studies claim that Guinness can be beneficial to the heart. Researchers found that “‘antioxidantcompounds’ in the Guinness, similar to those found in certain fruits and vegetables, are responsible for the health benefits because they slow down the deposit of harmful cholesterol on the artery walls.”Guinness ran an advertising campaign in the 1920s which stemmed from market research – when people told the company that they felt good after their pint, the slogan, created by Dorothy L. Sayers–”Guinness is Good for You”. Advertising for alcoholic drinks that implies improved physical performance or enhanced personal qualities is now prohibited in Ireland.Diageo, the company that now manufactures Guinness, says: “We never make any medical claims for our drinks.”  
  • Fantastic ,imposing Dublin Gold Matured for Seven Years Irish Whiskey Advert in magnificent, gold frame 60 cm x 95cm  Dublin
    "A whiskey is the creation of something harmonious, balanced and fundamentally social... It brings together the mastery of the distilling process with the mystery of its humble ingredients. It is this indefinable nature that makes a Premium Whiskey far more than the sum of its parts.” The Jameson Masters
     
    In order to be called an “Irish Whiskey”, distilled spirit must be;
    • -  aged in wood barrels for a minimum of 3 years.
    • -  a minimum of 40% ABV.
    • -  distilled and matured on the island of Ireland.There are several types of Irish Whiskey including; Pot still Irish Whiskey Pot still whiskey is whiskey made from a combination of malted barley and unmalted barley and is distilled in traditional copper pot stills. Pot Still Irish Whiskeys are characterised by full bodied flavours and a wonderful creamy mouth feel. Blended Irish Whiskey A blended whiskey is a combination of 2 or more styles of whiskey (grain, pot still or malt whiskey). Grain Irish Whiskey Grain whiskey is typically produced from a mash of maize and malted barley. Grain whiskey is lighter in character than pot still whiskey and generally the characteristics display delicate, fragrant and floral notes. Malt Irish WhIskey A single malt whiskey is made exclusively from malted barley and is distilled using a pot still.
    Add to cart Details
Go to Top